 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| S/MOD/SLA/C/5/12/2003 Relais Statique miniature sortie AC AC SLIM Solid State Relay * Compatibilite du brochage avec les Relais Electro-mecaniques . * Commande 5 , 12 et 24 VDC selon modeles * Sortie 12-280VAC - 2A * Reseau RC integre * Developpe en conformite avec les normes EN60950 ( VDE0805) * Pin to pin compatible with Electromechanic Relays. * 5 ; 12 and 24VDC control * 12-280VAC - 2A * Integrated RC snubber * Designed in conformity with EN60950 (VDE0805) 28 (1.10) 5 (0.20) page 1 / 2 F/GB SLA range 12-280VAC 2A output DC input 3,5 (0.14) 15 (0.59) grid 0,1"/ grille 2,54mm top view/vue de dessus 3,8 (0.15) 0,5 x 0,4mm (0.02 x 0.015) 16,5 (0.65) Vue de dessous Bottom View 5,1 (0.20) 2 (0.08) 1,4 (0.06) A2 - A1 + 2 - o 0,8 mm 2 - o 1,1mm 1 x 0,4mm (0.04 x 0.015) 0.15 0.65 0.20 PCB Layout (-) 4 3 (+) INPUT 2 1 OUTPUT Caracteristiques de commande (a 20C) / Control characteristics (at 20C) Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc nom ) Tension de relachement/Release voltage Resistance interne / Input internal resistor Symbol Uc Ic Uc off Rc SLA01220 Min 3 5,7 DC Nom SLA02220 Min 7 5,4 DC Nom SLA03220 Min 18 5,6 DC Nom 5 12 320 Max 10 27 1 12 10 1100 Max 20 18 1 24 7,7 3000 Max Unit 32 V 10,2 1 mA V Caracteristiques generales / General characteristics Parameter Plage de temperature de fonctionnement /Operating temperature range Plage de temperature de stockage /Storage temperature range Isolement entree-sortie / Input-output isolation Poids/Weight Temperature de soudage max / Maximum soldering heat(1 mm boitier/case) Conformite / Conformity Homologation / Approved Conditions Boitier / Case Boitier / Case Symbol Tc max Tc max Typ. -20 / +80 C -40 / +100 C 4000 VRMS 8 g Ts max 220 C EN60947-5-1 UL pending VDE0805(EN60950) pending 10 s Proud to serve you All technical characteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/MOD/SLA/C/5/12/2003 page 2 / 2 F/GB Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete (ecreteur de tension) / Peak voltage (clamping voltage) Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal / Nominal current (see Fig. 2) Courant nominal / Nominal current (see Fig. 2) Courant nominal / Nominal current (see Fig. 2) Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) RC interne /Snubber EMC Test d'immunite conduite/Conducted immunity level Symbol Ul Ulmin-max Up Usync Il nom Ua AC12 Il AC12 AC13 Il AC13 AC15 Il AC15 tp=10ms (Fig. 3) Itsm @ Il nom Vd @Ul, 50Hz Ilk Ilmin Uc nom DC ,f=50Hz ton max Uc nom DC ,f=50Hz toff max f dv/dt di/dt I2t IEC 1000-4-4 (bursts) Conditions Typ. Unit 230 V rms 12-275 V rms 600 V random V 5 V 2 A rms 2 A rms 2 A rms 80 A 1,2 V <1,5 mA 5 mA 0,1 ms 10 ms 47-400 Hz 500 V/s 100 A/s 36 A2s 10nF 100 1kV criterion A / 4kV criterion B 3 Surge current Itsm (Apeak) = f(t) fig.2 2,5 2 fig.3 80 Itsm (Apeak) 60 40 1 I (A) 1,5 1 0,5 0 0 10 20 30 40 50 60 70 80 2 20 0 0,01 0,1 1 10 Tambient(C) t(s) Fig. 2 : Courant en fonction de la temperature ambiante / Load current vs. ambient temperature characteristics Fig 3 : Courants de surcharge / Surge current : 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . Precautions : * Dans le cas de plusieurs modules cote a cote, prevoir un derating en courant. * Sur charges avec capacites a l'entree ( filtre, ballast de lampe a decharge,....) des surtensions peuvant se produire sur le relais,il est necessaire d'utiliser des relais 400VAC : nous consulter. Cautions : * In case of many SSRs side by side , take a derating current in to account . * On loads with capacitor at the input (filters , ballasts for discharge lamps,...) , some overvoltages can appear , so it is necessary to use 400VAC SSRs : Please contact us. celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SLA02220
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |